|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 |
local DEFAULT_EXPECTED_ENTRY_HEIGHT = ZO_GAMEPAD_DEFAULT_LIST_ENTRY_SELECTED_HEIGHT
local DEFAULT_EXPECTED_HEADER_HEIGHT = 24
ZO_PARAMETRIC_MOVEMENT_TYPES =
{
MOVE_NEXT = 1,
MOVE_PREVIOUS = 2,
JUMP_NEXT = 3,
JUMP_PREVIOUS = 4,
-- LAST allows derived classes to start their movement enumerations after the base movements
LAST = 5,
}
--[[ Public API ]]--
return scrollList
end
PARAMETRIC_SCROLL_LIST_VERTICAL = true
PARAMETRIC_SCROLL_LIST_HORIZONTAL = false
ZO_VERTICAL_PARAMETRIC_LIST_DEFAULT_FADE_GRADIENT_SIZE = 150
ZO_HORIZONTAL_PARAMETRIC_LIST_DEFAULT_FADE_GRADIENT_SIZE = 300
function ZO_ParametricScrollList:Initialize(control, mode, onActivatedChangedFunction, onCommitWithItemsFunction, onClearedFunction)
if(screenCenterControl) then
end
end
self.movementController = ZO_MovementController:New(self.mode == PARAMETRIC_SCROLL_LIST_VERTICAL and MOVEMENT_CONTROLLER_DIRECTION_VERTICAL or MOVEMENT_CONTROLLER_DIRECTION_HORIZONTAL)
end
return leftData == rightData
end
end
function ZO_ParametricScrollList:AddDataTemplate(templateName, setupFunction, parametricFunction, equalityFunction, controlPoolPrefix, controlPoolResetFunction)
local dataTypeInfo = {
pool = controlPool,
hasHeader = false,
}
end
end
end
end
end
end
end
function ZO_ParametricScrollList:SetDataTemplateWithHeaderReleaseFunction(templateName, releaseFunction)
end
end
function ZO_ParametricScrollList_DefaultMenuEntryWithHeaderSetup(control, data, selected, selectedDuringRebuild, enabled, activated)
end
end
function ZO_ParametricScrollList:AddDataTemplateWithHeader(templateName, setupFunction , parametricFunction, equalityFunction, headerTemplateName, optionalHeaderSetupFunction, controlPoolPrefix, controlPoolResetFunction)
local entryTemplateName = templateName
templateName = templateName.."WithHeader"
if controlPoolPrefix then
controlPoolPrefix = controlPoolPrefix.."WithHeader"
end
local dataTypeInfo = {
pool = ZO_ControlPool:New(entryTemplateName, self.scrollControl, controlPoolPrefix or templateName),
headerSetupFunction = optionalHeaderSetupFunction or ZO_ParametricScrollList_DefaultMenuEntryWithHeaderSetup,
hasHeader = true,
}
local headerControl = CreateControlFromVirtual(control:GetName().."Header", self.scrollControl, headerTemplateName)
--We create the control as a child of the scroll control, but the anchors are specified in relation to this control.
--We do this to have the header not inherit alpha from changing the control's alpha
for i = 0, 1 do
if isValid then
end
end
end)
end
end)
end)
end
end
end
end
function ZO_ParametricScrollList:AddEntryAtIndex(index, templateName, data, prePadding, postPadding, preSelectedOffsetAdditionalPadding, postSelectedOffsetAdditionalPadding, selectedCenterOffset)
--Keep these parallel arrays in sync with RemoveEntry below
-- NOTE: These are set to false if not specified as nil will cause the next entry to have an incorrect index in the field. Direct
-- access is not recommended, use the GetSelectedAdditionalPaddingForDataIndex() or GetPaddingForDataIndex() functions instead.
table.insert(self.preSelectedOffsetAdditionalPadding, index, preSelectedOffsetAdditionalPadding or false)
table.insert(self.postSelectedOffsetAdditionalPadding, index, postSelectedOffsetAdditionalPadding or false)
end
end
function ZO_ParametricScrollList:AddEntry(templateName, data, prePadding, postPadding, preSelectedOffsetAdditionalPadding, postSelectedOffsetAdditionalPadding, selectedCenterOffset)
self:AddEntryAtIndex(#self.dataList + 1, templateName, data, prePadding, postPadding, preSelectedOffsetAdditionalPadding, postSelectedOffsetAdditionalPadding, selectedCenterOffset)
end
if dataIndex then
end
end
end
end
if not templateName or currentTemplateName == templateName then
return i
end
end
end
end
return index
end
end
return nil
end
end
end
end
end
end
end
end
end
end
end
local firstSelectedableIndex = self:GetNextSelectableIndex(0) -- this function adds 1 from the passed in current index
end
end
end
end
end
end
end
local expectedEntryHalfHeight = (expectedEntryHeight or DEFAULT_EXPECTED_ENTRY_HEIGHT) / 2.0
if(self.alignToScreenCenter ~= alignToScreenCenter or self.alignToScreenCenterExpectedEntryHalfHeight ~= expectedEntryHalfHeight) then
end
end
--If the list is still animating when it is deactivated then complete the animation instantly before deactivating.
--Otherwise, things can happen like selected index changing which the list is deactivated
end
else
end
end
end
end
end
end
end
end
local FIRE_ACTIVATION_CHANGED = false
end
end
local FIRE_ACTIVATION_CHANGED = false
end
end
end
end
function ZO_ParametricScrollList:SetAdditionalBottomSelectedItemOffsets(additonalMinBottomOffset, additonalMaxBottomOffset)
end
end
end
end
end
end
local INITIAL_UPDATE = true
local RESELECTING_DURING_REBUILD = true
else
self:UpdateAnchors(self:CalculateSelectedIndexOffsetWithDrag(), INITIAL_UPDATE, RESELECTING_DURING_REBUILD)
end
end
end
end
return true -- default to true
end
end
newIndex = newIndex - 1
end
if newIndex >= 1 then
return true
elseif newIndex == 0 then
end
end
return false
end
return true
end
end
return false
end
end
return false
end
return (bottom <= bottomList) and (top >= topList)
end
return false
end
end
function ZO_ParametricScrollList:SetSelectedIndexWithoutAnimation(selectedIndex, allowEvenIfDisabled, forceAnimation)
end
function ZO_ParametricScrollList:SetSelectedIndex(selectedIndex, allowEvenIfDisabled, forceAnimation, jumpType, blockSelectionChangedCallback)
local reachedTargetIndex = (self.targetSelectedIndex == self:CalculateSelectedIndexOffsetWithDrag())
if not blockSelectionChangedCallback then
self:FireCallbacks("TargetDataChanged", self, self:GetDataForDataIndex(self.targetSelectedIndex), self:GetDataForDataIndex(oldTargetSelectedIndex), reachedTargetIndex, self.targetSelectedIndex)
end
if jumpType and moveAmount > 0 then
end
end
end
end
end
end
end
function ZO_ParametricScrollList:SetDefaultIndexSelected(animate, allowEvenIfDisabled, forceAnimation, jumpType)
if animate then
else
end
end
return i
end
end
return 1
end
return i
end
end
end
end
if selectedIndex then
end
end
if selectedIndex then
return self:SetSelectedDataByRangedEval(eval, zo_min(selectedIndex + 1, #self.dataList), #self.dataList, jumpType)
end
end
local newIndex = currentIndex + 1
newIndex = newIndex + 1
end
return newIndex
end
local direction = startIndex < endIndex and 1 or -1
for i = startIndex, endIndex, direction do
return true
end
end
return false
end
end
end
end
end
self.commitHistoryDictionary[self.currentCommitHistoryKey] = { data = self.oldSelectedData, template = self.oldSelectedDataTemplate, selectedIndex = self.oldSelectedIndex }
end
end
end
for i = oldSelectedIndex, #newDataList do
return i
end
end
return i
end
end
return oldSelectedIndex
end
end
local NO_RESELECT = true
end
local hasItems = dataListSize > 0
if hasItems then
end
local nextSelectedIndex
if nextCommitHistory then
nextSelectedIndex = nextCommitHistory.selectedIndex
end
else
end
if dontReselect then
else
local oldSelectedData, oldSelectedDataTemplate
if nextCommitHistory then
end
else
end
if oldSelectedDataTemplate then
if matchingIndex > dataListSize then
matchingIndex = dataListSize
end
end
end
matchingIndex = matchingIndex + 1
end
if matchingIndex > dataListSize then
matchingIndex = dataListSize
end
local ALLOW_EVEN_IF_DISABLED = true
local FORCE_ANIMATION = true
local DEFAULT_JUMP_TYPE = nil
self:SetSelectedIndex(matchingIndex, ALLOW_EVEN_IF_DISABLED, FORCE_ANIMATION, DEFAULT_JUMP_TYPE, blockSelectionChangedCallback)
local INITIAL_UPDATE = true
local RESELECTING_DURING_REBUILD = true
self:UpdateAnchors(self:CalculateSelectedIndexOffsetWithDrag(), INITIAL_UPDATE, RESELECTING_DURING_REBUILD, blockSelectionChangedCallback)
-- If the selectedData is set in the setup function (such as for the header), the code above
-- may have picked a non-selectable item if this is the first time the items were setup. As
-- such, we need to check for that condition, and move to the next item if we hit it.
-- NOTE: MoveNext() will skip over additional unselectable items internally.
if matchingIndex == dataListSize then
else
end
end
end
end
local hideArrows = dataListSize <= 1
end
end
if hasItems then
end
else
if blockSelectionChangedCallback ~= true then
self:FireCallbacks("SelectedDataChanged", self, nil, oldSelectedData, nil, self.targetSelectedIndex)
end
end
end
end
end
end
end
end
end
end
end
--[[ Private API ]]--
end
if mode == PARAMETRIC_SCROLL_LIST_VERTICAL then
return offsetY, offsetX
end
return offsetX, offsetY
end
end
end
end
end
end
end
local SELECTION_LERP_RATE = 0.2
return zo_deltaNormalizedLerp(self.lastContinousTargetOffset, continousTargetOffset, SELECTION_LERP_RATE)
end
end
end
end
else
end
end
return
end
if result == MOVEMENT_CONTROLLER_MOVE_NEXT then
elseif result == MOVEMENT_CONTROLLER_MOVE_PREVIOUS then
end
end
--Will fire a callback with the directional input result
--Optionally you can return true to consume the result before the list processes it
end
end
function ZO_ParametricScrollList:SetAnchorForEntryControl(control, anchor1, anchor2, offsetX, offsetY)
end
end
end
return BOTTOM, CENTER
else
return TOP, CENTER
end
else
return TOP, TOP
end
end
end
end
local SELECTED = true
local UNSELECTED = false
function ZO_ParametricScrollList:UpdateAnchors(continousTargetOffset, initialUpdate, reselectingDuringRebuild, blockSelectionChangedCallback)
-- Find center control
else
end
end
if justCreated or selectedDataChanged or initialUpdate then
self:RunSetupOnControl(centerControl, self.selectedIndex, SELECTED, reselectingDuringRebuild, self.enabled, self.active)
end
local baseOffset = newSelectedDataIndex - continousTargetOffset
local preCenterPadding, postCenterPadding = self:GetPaddingForDataIndex(newSelectedDataIndex, 0, baseOffset)
local centerOffset = centerControlDimension * baseOffset
local centerSelectedOffsetAdditionalPrePadding, centerSelectedOffsetAdditionalPostPadding = self:GetSelectedAdditionalPaddingForDataIndex(newSelectedDataIndex)
end
local centerOffsetX, centerOffsetY = TransformAnchorOffsetsForMode(self.mode, centerOffset * self.centerDampingFactor + fixedCenterOffset + centerSelectedOffset * (1 - baseOffset), 0)
self:SetAnchorForEntryControl(centerControl, entryAnchor1, entryAnchor2, centerOffsetX, centerOffsetY)
-- Layout items before the center
do
local prevControlOffsets = centerOffset - (self.anchorOppositeSide and centerControlDimension or 0) + preCenterPadding + centerSelectedOffset * (1 - baseOffset)
for dataIndex = newSelectedDataIndex - 1, 1, -1 do
local control = self:AcquireAndSetupControl(dataIndex, selectedDataChanged, initialUpdate, oldSelectedData, UNSELECTED, reselectingDuringRebuild)
local distanceFromCenter = newSelectedDataIndex - dataIndex
local preSelectedOffsetAdditionalPadding, _ = self:GetSelectedAdditionalPaddingForDataIndex(dataIndex)
local parametricOffset = self:CalculateParametricOffset(centerSelectedOffsetAdditionalPrePadding, preSelectedOffsetAdditionalPadding, distanceFromCenter, baseOffset)
local prePadding, postPadding = self:GetPaddingForDataIndex(dataIndex, distanceFromCenter, baseOffset)
end
prevControlOffsets = prevControlOffsets - (self.anchorOppositeSide and 0 or controlDimension) - parametricOffset - postPadding
self:SetAnchorForEntryControl(control, entryAnchor1, entryAnchor2, TransformAnchorOffsetsForMode(self.mode, prevControlOffsets + fixedCenterOffset, 0))
prevControlOffsets = prevControlOffsets - prePadding - (self.anchorOppositeSide and controlDimension or 0)
break
end
end
end
-- Layout items after the center
do
local prevControlOffsets = centerOffset + (self.anchorOppositeSide and 0 or centerControlDimension) + postCenterPadding + centerSelectedOffset * (1 - baseOffset)
local control = self:AcquireAndSetupControl(dataIndex, selectedDataChanged, initialUpdate, oldSelectedData, UNSELECTED, reselectingDuringRebuild)
local distanceFromCenter = newSelectedDataIndex - dataIndex
local _, postSelectedOffsetAdditionalPadding = self:GetSelectedAdditionalPaddingForDataIndex(dataIndex)
local parametricOffset = self:CalculateParametricOffset(centerSelectedOffsetAdditionalPostPadding, postSelectedOffsetAdditionalPadding, distanceFromCenter, baseOffset)
local additionalBottomParametricOffset = self:CalculateAdditionalBottomParametricOffset(distanceFromCenter, baseOffset)
local prePadding, postPadding = self:GetPaddingForDataIndex(dataIndex, distanceFromCenter, baseOffset)
end
prevControlOffsets = prevControlOffsets + parametricOffset + prePadding + additionalBottomParametricOffset + (self.anchorOppositeSide and controlDimension or 0)
self:SetAnchorForEntryControl(control, entryAnchor1, entryAnchor2, TransformAnchorOffsetsForMode(self.mode, prevControlOffsets + fixedCenterOffset, 0))
prevControlOffsets = prevControlOffsets + (self.anchorOppositeSide and 0 or controlDimension) + postPadding
break
end
end
end
end
-- Remove unseen controls
do
end
end
if selectedDataChanged and blockSelectionChangedCallback ~= true then
self:FireCallbacks("SelectedDataChanged", self, self.selectedData, oldSelectedData, reachedTarget, self.targetSelectedIndex)
end
end
local centerOffsetX, centerOffsetY = TransformAnchorOffsetsForMode(self.mode, self.fixedCenterOffset - halfHeightOffset, 0)
self:SetAnchorForEntryControl(self.noItemsLabel, entryAnchor1, entryAnchor2, centerOffsetX, centerOffsetY)
end
end
local HAND_OFF_SPEED_FACTOR = 2
local function CalculateStandardOffset(distanceFromCenter, continuousParametricOffset, min, max, startAdditionalPadding, endAdditionalPadding, additionalPaddingEasingFunc)
local hasAdditionalPadding = (endAdditionalPadding ~= 0 or startAdditionalPadding ~= 0) and distanceFromCenter >= -1 and distanceFromCenter <= 1
-- If easing function wasn't specified for additional padding, use the default
end
if parametricValue > 1 then
local additionalPadding = hasAdditionalPadding and zo_lerp(startAdditionalPadding, endAdditionalPadding, zo_saturate(additionalPaddingEasingFunc(parametricValue - 1))) or 0
return zo_lerp(max, min, zo_saturate(ZO_EaseInQuartic(parametricValue - 1) * HAND_OFF_SPEED_FACTOR)) + additionalPadding
end
local additionalPadding = hasAdditionalPadding and zo_lerp(endAdditionalPadding, startAdditionalPadding, zo_saturate(additionalPaddingEasingFunc(parametricValue))) or 0
return zo_lerp(min, max, zo_saturate(ZO_EaseInQuartic(parametricValue) * HAND_OFF_SPEED_FACTOR)) + additionalPadding
end
function ZO_ParametricScrollList:CalculateParametricOffset(startAdditionalPadding, endAdditionalPadding, distanceFromCenter, continuousParametricOffset, additionalPaddingEasingFunc)
return CalculateStandardOffset(distanceFromCenter, continuousParametricOffset, self.minOffset, self.maxOffset, startAdditionalPadding, endAdditionalPadding, additionalPaddingEasingFunc)
end
function ZO_ParametricScrollList:CalculateAdditionalBottomParametricOffset(distanceFromCenter, continuousParametricOffset, additionalPaddingEasingFunc)
return CalculateStandardOffset(distanceFromCenter, continuousParametricOffset, self.additonalMinBottomOffset, self.additonalMaxBottomOffset, 0, 0, additionalPaddingEasingFunc)
end
end
function ZO_ParametricScrollList:RunSetupOnControl(control, dataIndex, selected, reselectingDuringRebuild, enabled, active)
dataTypeInfo.headerSetupFunction(control:GetNamedChild("Header"), data, selected, reselectingDuringRebuild, enabled, active)
end
end
end
end
end
end
end
end
end
local isHeader = templateInfo and templateInfo.hasHeader
local nextHeader = nextTemplateInfo and nextTemplateInfo.hasHeader
return isHeader, nextHeader
end
if (not preSelectedOffsetAdditionalPadding) or (not postSelectedOffsetAdditionalPadding) then
preSelectedOffsetAdditionalPadding = preSelectedOffsetAdditionalPadding or (isHeader and self.headerSelectedPadding) or 0
postSelectedOffsetAdditionalPadding = postSelectedOffsetAdditionalPadding or (isNextHeader and self.headerSelectedPadding) or 0
end
return preSelectedOffsetAdditionalPadding, postSelectedOffsetAdditionalPadding
end
function ZO_ParametricScrollList:GetPaddingForDataIndex(dataIndex, distanceFromCenter, continousParametricOffset)
if not postPadding then
end
if rawParametricValue == 0 then
end
if parametricValue > .5 then
parametricValue = 1 - (parametricValue - .5) / .5
else
parametricValue = parametricValue * 2
end
local preParametricValue, postParametricValue
if rawParametricValue < 0 then
preParametricValue = parametricValue
postParametricValue = 0
else
preParametricValue = 0
postParametricValue = parametricValue
end
return zo_lerp(prePadding, prePadding * .25, preParametricValue) + self.universalPrePadding, zo_lerp(postPadding, postPadding * .25, postParametricValue) + self.universalPostPadding
end
return true
else
if numChildren > 0 then
for i = 1, numChildren do
return true
end
end
end
return false
end
end
do
end
end
--Check if one of the children of this control is an edit box the first time we create one of these
end
end
end
function ZO_ParametricScrollList:AcquireAndSetupControl(dataIndex, selectedDataChanged, initialUpdate, oldSelectedData, selected, reselectingDuringRebuild)
self:RunSetupOnControl(control, dataIndex, selected, reselectingDuringRebuild, self.enabled, self.active)
end
end
else
if numChildren > 0 then
for i = 1, numChildren do
if(editControl ~= nil) then
end
end
end
return nil
end
end
--check for edit controls that need to be defocused before moving the current selection
end
end
if not isMoving then
end
end
end
end
--Set this to true if you plan to change the list size or view properties (like center offsets) between commits. For example, if the list is anchored on the top and bottom and changes size when the user resizes the screen.
if handleDynamicViewProperties then
self.scrollControl:SetHandler("OnRectChanged", function(scrollControl, newLeft, newTop, newRight, newBottom, oldLeft, oldTop, oldRight, oldBottom)
--if the edges of the scroll area changed we need to fix up the gradients
--If the list has less than ZO_VERTICAL_PARAMETRIC_LIST_DEFAULT_FADE_GRADIENT_SIZE UI units from its center control to the scroll top or bottom then automatically size the fade gradients to not overlap the center control.
--If the list changes height we need to update anchors because that function is responsible for hiding controls that went out of view or showing controls that are now in view.
end
end)
else
end
end
end
end
end
local hasHeaders = false
if dataTypeInfo.hasHeader then
hasHeaders = true
break
end
end
local selectedControlBufferStart = 0
if hasHeaders then
selectedControlBufferStart = selectedControlBufferStart - self.headerSelectedPadding + DEFAULT_EXPECTED_HEADER_HEIGHT
end
local selectedControlBufferEnd = DEFAULT_EXPECTED_ENTRY_HEIGHT
end
-- Have some small minimum effect
local MINIMUM_ALLOWED_FADE_GRADIENT = 32
local gradientMaxStart = zo_max(listMid - listStart - selectedControlBufferStart, MINIMUM_ALLOWED_FADE_GRADIENT)
local gradientMaxEnd = zo_max(listEnd - listMid - selectedControlBufferEnd, MINIMUM_ALLOWED_FADE_GRADIENT)
local gradientStartSize = zo_min(gradientMaxStart, ZO_VERTICAL_PARAMETRIC_LIST_DEFAULT_FADE_GRADIENT_SIZE)
local gradientEndSize = zo_min(gradientMaxEnd, ZO_VERTICAL_PARAMETRIC_LIST_DEFAULT_FADE_GRADIENT_SIZE)
local FIRST_FADE_GRADIENT = 1
local SECOND_FADE_GRADIENT = 2
local GRADIENT_TEX_CORD_0 = 0
local GRADIENT_TEX_CORD_1 = 1
local GRADIENT_TEX_CORD_NEG_1 = -1
self.scrollControl:SetFadeGradient(FIRST_FADE_GRADIENT, GRADIENT_TEX_CORD_0, GRADIENT_TEX_CORD_1, gradientStartSize)
self.scrollControl:SetFadeGradient(SECOND_FADE_GRADIENT, GRADIENT_TEX_CORD_0, GRADIENT_TEX_CORD_NEG_1, gradientEndSize)
end
end
end
end
end
end
--in case you don't want your list to default to the first entry in the list!
end
if targetControl.headerControl then
end
end
end |